• 1
  • 2
  • 3
  • 4
  • 5

Tech Inspection Form

»Download 1-page printable PDF Tech Inspection Form...«

Tech Inspection Form

Driver:____________________________________Date:____________

Make:_________________________________Model:______________________

Year:_________Color:______Stock or Modified:__________

Note: You are self-teching your car, it is your obligation to physically check every item on this form. Do not assume your lugs are tight, for instance, re-torque them to make sure. This checklist is for your safety and the safety of the others on the track with you, and should not be dismissed as a formality. After teching your car, you must sign the bottom of the form (in both places if you're self teching), which indicates that you have, in good faith, checked every item on this form. Please bring this form with you to the track, or you'll have to do a new tech at the track, possibly missing your first run group. Thanks for your cooperation.

All loose items must be removed from car and trunk before going on track.

*DOT APPROVED HELMENT REQUIRED

Tech Inspection Form

WHEEL and TIRES

Yes

No

STEERING & SUSPENSION

Yes

No

Street Tires:

   

Wheel bearings ok (no play)?

   

More than 2/32" of tread?

   

Steering tight?

   

Race Tires:

         

Good condition/no cording?

   

Body

   

Cuts or other other defects?

   

Gas cap ok?

   

All lugs present and torqued?

   

Body panels secure?

   

Hubcaps/ Centercaps removed?

         

ENGINE

   

SAFETY EQUIPMENT

   

Any fluid leaks?

   

DOT Helmet Required (SA2015+)

   

Wires/hoses secured?

   

Seat belts secure, no cuts?

   

Throttle return springs tight?

   

Seats secure?

   

Radiator overflow ok?

   

Long sleeve cotton shirt?

   

Battery properly secured?

   

Closed-toed shoes?

   

Battery terminals covered (rubber boots / duct tape ok)?

         

Fluid lines ok?

         

BRAKES

         

Pedal pressure firm?

         

Fluid level correct?

         

Lines ok?

         

Brakes lights working?

         

Pads more than 5mm?

         

Rotors ok (no cracks, etc)?

         

Inspector :

(Print Name):____________________________

Signature:__________________________________